VN-35E SAS/B e007444
USD 282.00
Description
Manufacturer : SHURE
Super Analog Stylus (SAS) Profile Tip
The tip of the is carefully chosen from single-crystal natural diamonds. The laser-cut diamond closely resembles that of the cutting stylus used on a cutting lathe to produce the acetate master disks used in vinyl production. This allows the SAS tip to reach into the deepest recesses of the record groove in order to retrieve details which were previously inaccessible to other stylus profiles. Due to its wide contact area with the groove wall, the SAS can reproduce a more expansive bandwidth of information with higher fidelity.
Cantilever
is one of the most suitable materials for cantilevers. its density is low, Young’s modulus is large, and the speed of sound propagation is approximately 2.6 times faster than that of aluminum. Due to the characteristics above, boron cantilever can more precisely trace the information contained in the record grooves than aluminum cantilever.
There is no difference at all between the VN35 SAS [e007444] and the VN35HE SAS [e007446] versions. Technically speaking, they are identical.We just use the naming conventions of the originals to make them easier for customers to find.
Additional information
| Cantilever | |
|---|---|
| Cartridge number | |
| Color | |
| Tip | |
| Tracking Force | |
| Type |
Anonymous –
Very good Stylus for my Shure V15-III. The Shure is playing awesome with this needle now. In reference to a review before: at high magnification you can see the special cut very well.
Anonymous –
Sound good but under a microscope its nothing like the illustration, or an original Shure (I have one where the stylus is perfect, but loose in the shank). Also a HUGE dollop of glue is used to hold the diamond in the shank. If this could be reduced, or a push fit used then the stylus would be a lot better
Anonymous –
Awesome stylus!! I highly recommend these SAS stylus to anyone with vintage cartridges.